Table of Contents
Advertisement
Status Code
003-754
An error occurred in the document feeder.
Try the same operation. Contact customer support if this failure is repeated.
003-755
003-756
Check whether the document is blank or whether the side of the document to be faxed is
loaded correctly.
003-757
Set the resolution to 300 dpi or lower.
003-760
An incompatible combination of features was specified. Check the features you selected.
003-761
Change the paper size for the tray.
003-763
Place the Calibration Chart correctly on the document glass. Contact customer support if
this failure is repeated.
Reduce the resolution or the ratio for Reduce/Enlarge to decrease the data size, or split
003-780
the data to send it separately.
003-795
The reduction/enlargement ratio exceeded the allowed range.
003-913
Memory is not enough, a selected resolution is not available for scanning a A3 document.
003-930
It is available for scanning a A4/B4 document, reduce the resolution.
003-931
003-932
003-933
003-934
003-935
003-940
Memory is insufficient.
Cancel the job.
Clear the B/W setting for Color mode or the Side 2 cover image setting.
003-941
Page memory is insufficient.
Change the parameter(s), and try again.
003-944
An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
repeated.
003-946
Paper direction difference.
Select an appropriate paper tray manually.
003-947
Since the number of documents is insufficient, reload the correct number of documents.
Cancel the job, and try again.
003-948
Return a document with the correct size again.
Cancel the job, and try again.
003-952
Return a document with the correct color again.
Cancel the job, and try again.
003-956
Undefined document size.
Enter a document size from the Control Panel or select a paper tray.
003-963
Change the paper size for the tray.
003-965
There was no paper in the tray that can be selected for the machine.
Add paper.
003-970
The number of slow-scan lines has exceeded the upper limit due to Fax parallel
composition.
Try to store as much data as the memory capacity and continue scanning the next
document. Or, cancel the job.
288
|
Understanding Printer Messages
Cause and Remedy
Advertisement
Table of Contents
