Table of Contents
Advertisement
• Mac OS X
FTP service of Mac OS X 10.7 Lion, and OS X 10.8 Mountain Lion/10.9 Mavericks/10.10
Yosemite/10.11 El Capitan
NOTE:
• For information on how to configure the FTP service, refer to the manual provided with the
software.
Using SMB
To transfer data via SMB, your computer must run on one of the following operating
systems that includes folder sharing.
For Mac OS X, a shared user account is required on the Mac OS X.
• Microsoft Windows Server 2008 R2
• Microsoft Windows Server 2012 R2
• Microsoft Windows Server 2016
• Microsoft Windows Vista
• Microsoft Windows 7
• Microsoft Windows 8.1
• Microsoft Windows 10
• Mac OS X 10.7 Lion
• OS X 10.8 Mountain Lion
• OS X 10.9 Mavericks
• OS X 10.11 El Capitan
• macOS 10.12 Sierra
Step 2 Enabling Port and Setting up TCP/IP
To use the Scan To service, enable the port (SMB or FTP client) and set the IP address.
NOTE:
• You can also configure the settings using Dell Printer Configuration Web Tool.
1 Press the
button.
2 Select Device Connectivity Ethernet.
3 Enable the port.
NOTE:
• See "Ethernet".
4 Set the IP address of the machine and the other addresses.
Skip this step if an IP address is already set.
If DHCP is available in your environment, configure the method for obtaining the
address. If an IP address cannot be obtained automatically or manual configuration is
preferred, confirm the settings of an IP address, a subnet mask, and a gateway
address.
NOTE:
• For information on how to set an IP address, refer to "Setting the IP Address".
5 When a message appears on the screen, follow the message and reboot the
machine.
241
Scanning
|
Advertisement
Table of Contents
