Table of Contents
Advertisement
is scanned. This allows you to scan the documents as a single set of data.
Up to 100 pages can be stored.
When you select Done, the printer finishes scanning. If you wait for the predefined time
without selecting Add Page, Done is automatically selected.
NOTE:
• This feature is not available when the current document is loaded on the DADF.
You can add documents to the DADF, only when Preview is enabled.
• For information on how to set the maximum number of pages stored for a scan document, refer to
"Maximum Number of Stored Pages".
Scan to Desktop
Allows you to scan documents loaded on the machine and save the scanned data in the
network computer.
Printer Setup
Step 1 Preparations
The following environment is required to use the Scan to Desktop feature on the
machine.
• Microsoft Windows 10
• Microsoft Windows 8.1
• Microsoft Windows 7
• Microsoft Windows Vista Service Pack 2
• Microsoft Windows Server 2016
• Microsoft Windows Server 2012 R2
• Microsoft Windows Server 2008 R2
NOTE:
• In Windows Server environment, scanning devices are disabled by default.
For more information, visit the official website of Microsoft.
Step 2 Enabling Port
To use the Scan to Desktop service, enable the WSD scan port.
NOTE:
• WSD stands for Web Services on Devices.
• You can configure the settings using Dell Printer Configuration Web Tool.
See "Scan to Desktop".
Step 3 Confirmation on the Computer
Confirm that the machine name is displayed on the computer as a network device.
On Windows Vista, select Control Panel Hardware and Sound Scanners and Cameras
(On Windows 7 or later, select Control Panel Devices and Printers), and confirm the
machine name on the screen.
It is convenient to configure the settings such as the color format, file type, and resolution
250
|
Scanning
Advertisement
Table of Contents
