Table of Contents
Advertisement
Status Code
033-527
Fax error.
Confirm the other machine has a problem, and then execute the operation again.
033-528
Fax error.
Ask the sender to resend the fax.
033-529
Fax error.
Confirm the other machine has a problem, and then execute the operation again.
033-530
Received a procedure disabled signal.
Contact customer support if this failure is repeated.
033-531
Received a command rejection signal.
Confirm the condition of the other machine (memory is full, paper has run out, or other
conditions), and execute the operation again.
033-532
Fax error.
Try the same operation. If receiving, ask the sender to send again.
033-533
033-534
The other machine does not offer a feature to print the number of document sets sent.
Do not specify multiple sets.
033-535
Fax error.
Confirm information such as the recipient and folder information, and execute the
operation again.
033-536
Fax error.
Contact customer support if the failure is repeated.
033-537
033-538
Fax error.
Contact customer support if this failure is repeated.
033-539
033-540
033-541
Specify the recipient correctly.
033-542
Specify a connected line.
033-543
Enter a correct fax number, and execute the operation again.
033-544
The recipient's line is busy.
Wait for a while and try the same operation again.
033-545
No response from the fax recipient.
Confirm that the fax number is correct and that the status of the recipient machine.
033-546
A dial tone was not detected.
Check whether the line is connected correctly.
033-547
Communication was terminated, for example, with button operation by user.
033-548
Cannot transmit manually because a line is unavailable.
Establish communication such as by telephone, and execute the operation again.
033-549
Cannot use the Fax service because of causes such as memory is insufficient.
Wait for a while and try the same operation again.
033-550
Cannot execute another job because fax communication is in progress.
033-551
You attempted to change the job immediately before fax or telephone communication
completed.
Wait for a while and try the same operation again.
033-552
The total quantity of error lines detected with G3 exceeded the set value.
Confirm the model of the other machine, and execute the operation again. If receiving, ask
the sender to send again.
033-553
This machine does not have confidential or relay function. The F-code sent from the other
machine contains an instruction for a function not supported by the machine.
If necessary, check whether the sender entered an invalid F-code.
033-554
The password was omitted or did not match in fax communication.
332
|
Understanding Printer Messages
Cause and Remedy
Advertisement
Table of Contents
