Table of Contents
Advertisement
3 Tap Copy. To customize the copy settings, see "Copy".
NOTE:
• The copy options automatically return to their default status after the auto clear timer expires.
4 Enter the number of copies using the numeric keypad.
5 Tap Start.
NOTE:
• You can cancel the copy job while scanning the document by tapping the job banner and
select Delete on the job confirmation screen.
If you have more documents
Select Add Page on the touch screen after the current document on the document glass
is scanned. This allows you to copy the documents as a single set of data.
When you select Done, the printer finishes scanning. If you wait for the predefined time
without selecting Add Page, Done is automatically selected.
NOTE:
• This feature is not available when the current document is loaded on the DADF.
Confirming the Copy Job in Jobs
If copies are not output after you start the copy job, the job may be in pending status.
You can check the job status on the Jobs screen by the following procedure.
1 Press the
button.
2 Select Jobs.
3 Confirm the job status.
Stopping the Copy Job
To cancel copying a document, tap the job banner and select Delete on the touch
screen.
If the Delete button is not displayed on the screen, use the following procedure.
1 Press the
button.
2 Select Jobs.
3 Select the job to be deleted.
4 Select Delete.
236
|
Copying
Advertisement
Table of Contents
