Table of Contents
Advertisement
Status Code
016-750
The machine received a printing job ticket with a PDF or XPS from an application that
allows direct transmissions of files, but the printing job ticket data had a grammar or print
instruction unsupported by the machine.
Check whether you are correctly using the application and whether the print instruction
was correct.
If your application usage and print instruction are correct, check with the application
manufacturer that sent the print job for operations of the application.
If the error still is not resolved, have the Configuration Report, the Job History Report, and
the print data with the printing job ticket ready, and contact Customer Support at
dell.com/contactdell.
NOTE:
• XPS stands for XML Paper Specification.
016-751
Probable causes are as follows:
• During the PDF Bridge processing, a syntax or parameter error occurred, an undefined
command was used, and a PDF file was damaged. Use the print driver to print the
document.
• When Print Processing Mode ([408]) for the PDF Direct Print feature has been set to PS
([1]), memory is insufficient. Use the print driver to print the document or increase
PostScript memory.
• When Print Processing Mode ([408]) for the PDF Direct Print feature has been set to PS
([1]), a PDF file including OpenType fonts is processed. Create a PDF file in which
OpenType fonts are not included.
016-752
Unable to process for PDF Bridge because of insufficient memory space.
Lower the image quality to reduce the data size.
016-753
Enter the correct password on the printer.
016-755
Cancel the print protection using Adobe Reader, and try printing again.
016-756
No permission to use the service.
Contact your system administrator.
016-757
The account is not registered. Contact your system administrator.
016-758
No permission to use the service.
Contact your system administrator.
016-759
The number of pages reached the maximum number of pages for this service.
Contact your system administrator.
016-760
• Enable High Speed Image Processing. See the help of the print driver.
• Increase PostScript memory.
016-761
Enable High Speed Image Processing. See the help of the print driver. If the error is not
resolved, set Print Page Mode to On.
016-762
Specify correct printer language.
016-763
Confirm the POP server IP address set on the machine.
016-764
An error occurred when the printer connected to the SMTP server. Consult the SMTP
server administrator.
016-765
Unable to send the e-mail because the hard disk on the SMTP server is full.
Consult the SMTP server administrator.
016-766
An error occurred on the SMTP server.
Check the memory capacity available on the SMTP server.
016-767
Confirm the address, and try sending again.
016-768
Unable to connect to the SMTP server because the machine's mail address is incorrect.
Confirm the machine's mail address.
016-769
The SMTP server does not support delivery receipts (DSN).
Send e-mail without setting delivery receipts (DSN).
Cause and Remedy
Understanding Printer Messages
299
|
Advertisement
Table of Contents
