Table of Contents
Advertisement
Status Code
016-557
Check your authentication management software.
NOTE:
• For more information on the process, refer to the manual for your authentication
016-559
A remote download parameter error occurred.
Confirm the settings for essential system data.
016-560
Check whether the network cable is connected, and confirm the settings of your
authentication management software. Also, print a Configuration Report, and if the DNS
address of the server is set to "Server Name / IP Address" for "Authentication Agent", check
whether DNS is enabled.
016-562
Correct the guest database entries of Active Directory so that they do not contain the
same smart card information.
016-565
Make sure that the USB memory device is inserted securely.
If this error occurs during data backup, make sure on your computer that a folder named
"backup" exists in the USB memory device.
016-567
The capacity is not sufficient for backup. Delete existing backup files to make free space.
016-570
Increase the size of memory for job tickets, switch off the machine power, make sure that
the touch screen is blank, and then switch on the machine power. Try the same operation.
016-571
Unable to print because the content of the job ticket is incorrect. Correct the print
settings, and then send the print job again.
016-572
Unable to print because the paper size, quality, or color attribute specified for the job ticket
is not supported. Correct the paper attribute.
016-573
Unable to print because the content of the job ticket is incorrect. Check if the print driver is
supported by the machine, and is installed on the computer correctly. Also check the
operating conditions for the print driver.
016-574
Confirm the connection to the DNS server. Check whether the FTP server name is
registered correctly on the DNS server.
016-575
Specify the correct DNS server address. Or, specify the destination FTP server by using its
IP address.
016-576
Ensure that both the destination FTP server and the machine are available for network
communications, by checking the following conditions:
• The IP address of the server is set correctly.
• The network cables are plugged in securely.
016-577
• Check whether the FTP service of the server is activated.
• Check whether the FTP port number of the server is correctly registered on the
machine.
016-578
FTP server login error. Check whether the login name (user name) and password are
correct.
016-579
Check whether the FTP server's save location is correct.
016-580
Confirm the access privilege for the FTP server.
016-581
The suffix of the name of the file or folder in FTP exceeded the limit value.
Change the file name or forwarding destination folder of the scan server. Also try moving
or deleting the files within the forwarding destination folder.
016-582
• Check whether the specified file name can be used in the save location.
• Check whether enough space is available in the save location.
016-583
• If the lock directory (*.LCK) exists in the destination, delete it manually, and then execute
the operation again.
• Check whether the specified name is available in the save location.
• Confirm that the specified name is not duplicated in the save location.
• Check whether enough space is available in the save location.
296
|
Understanding Printer Messages
management software.
Cause and Remedy
Advertisement
Table of Contents
