Table of Contents
Advertisement
Status Code
116-390
Follow the message displayed on the touch screen and initialize the memory of the
machine.
116-391
An error occurred in the machine.
Turn off the printer, and turn it on again. Contact customer support if this failure is
116-392
repeated.
116-393
116-394
116-395
116-396
116-397
116-399
116-701
Memory space is insufficient. Remove unnecessary data to make space.
116-702
A print job was processed using a substitute font.
Check the print data.
116-703
Check the print data, or increase the value for PostScript Memory.
116-704
An error occurred when reading data on the media.
Check whether the media is inserted correctly.
116-705
An error occurred when reading data on the media.
Use a computer to confirm the content recorded on the media.
116-706
116-707
116-708
116-709
116-710
The correct document size could not be judged because the receive data exceeded the
HP-GL/2 spool size.
Increase the size assigned to HP-GL/2 auto layout memory.
116-713
The data has been divided into several jobs because of insufficient data storage space.
Delete unnecessary data from the data storage space.
116-714
An HP-GL/2 command error occurred.
Check the print data.
116-716
An error occurred when reading the data on the media.
On a computer, confirm the content recorded on the media.
116-717
116-719
Cancel XPIF parameters not supported by the printer.
116-720
An error occurred during print processing because of insufficient memory.
Stop unnecessary ports or delete unnecessary data to free up the data storage space.
116-721
Check the time permitted for the operation for you, and try again, or consult your system
administrator to change your authorization.
116-722
Consult your system administrator to change your authorization.
116-723
116-724
116-725
Try the same operation. Contact customer support if this failure is repeated.
116-726
Consult your system administrator to change your authorization.
116-727
116-728
116-738
Match the size and orientation of the paper with the form specified, and print again.
116-739
The form or logo data cannot be registered because memory for the form and logo data
or memory capacity is insufficient.
Delete unnecessary data, or free up the space for the form memory.
Cause and Remedy
Understanding Printer Messages
343
|
Advertisement
Table of Contents
