Table of Contents
Advertisement
Date & Time
Set the date and time for the system clock of the machine. The date and time set here will
be printed on all lists and reports.
Set Automatically
Select this to set the date and time automatically according to the time server.
If you do not select this, you can set the time zone, date and time, and daylight saving
time manually.
Time Server (SNTP)
Tap this to set the time server.
Server Address
Enter a server address.
Time Zone
Sets the region and time zone.
Date & Time
Sets the date and time.
Daylight Savings Time
Select this to enable daylight saving time.
Date Format
Select a date format.
• mm/dd/yyyy
• dd/mm/yyyy
• yyyy/mm/dd
Use 24 Hour Clock
Select this to use 24-hour clock. To use 12-hour clock, deselect this.
System Timeout
Specify the time lapsed without any operation on the control panel until the machine
resets the settings automatically.
Display Brightness
You can adjust the brightness of the touch panel between level 1 and level 7.
Sounds
Enable Sounds
Select this to activate sounds. Touch an event, and use the slider bar to set the volume of
65
Device
|
Advertisement
Table of Contents
