Table of Contents
Advertisement
5 In the Duplex drop-down list box, select Flip on Short Edge or Flip on Long Edge.
NOTE:
• For details on the Flip on Short Edge and Flip on Long Edge options, see "Flip on Short Edge"
and "Flip on Long Edge."
6 Click OK.
7 Click Print.
For OS X:
The following procedure uses TextEdit on OS X 10.10 as an example.
1 Open the file you want to print.
2 From the File menu, select Print.
3 Make sure that the Two-Sided check box is selected in the dialog box.
4 In the print options pop-up menu, select Layout.
5 In the Two-Sided drop-down list box, select Long-Edge binding or Short-Edge
binding.
6 Click Print.
Using Booklet Print
To use the booklet print feature, select the Enable check box of the Booklet Printing in
the Layout tab.
NOTE:
• When the XML Paper Specification (XPS) or PS driver is used, booklet print is not available.
• You must select Flip on Long Edge in the Duplex when using the Booklet Print feature.
Flip on Long Edge
222
|
Printing
Assumes binding along the long edge of the page (left edge for portrait
orientation and top edge for landscape orientation). The following
illustration shows long-edge binding for portrait and landscape pages:
Portrait
Landscape
Advertisement
Table of Contents
