Table of Contents
Advertisement
2 Insert the USB memory device into the front USB port.
NOTE:
• Please do not remove the USB device, when the screen is displaying data transfer. If you
remove the USB memory device while the data is being stored, the data and/or the USB device
may be damaged. You can also view the Jobs screen to confirm if the data has been stored to
the USB memory device.
• A USB memory device encrypted with software is not supported.
• Commercially available Memory Card Reader with single slot
performance is not guaranteed. When a Memory Card Reader with multi-slot
one particular slot is available. The available slot depends on the model, and the slot of
media/Memory Card that you want to use is not always available. Safe performance of a
Memory Card Reader with multi-slot is not guaranteed, either.
- *1: Media/Memory Card that has one slot. Some allow only one type of media/Memory Card,
while others allow more than one type (ex. SD card, xD-Picture Card).
- *2: Media/Memory Card that has two or more slots.
3 One of the following occurs.
• The USB Drive has been detected. screen appears.
• The Scan to USB screen appears.
• The Print from USB screen appears.
• The screen display does not change.
NOTE:
• If the inserted USB memory device has encrypted data or is in unsupported format, the
machine stops the process with showing a warning message.
• Connecting an empty Memory Card Reader may cause errors to the machine.
• If you leave a connected Memory Card Reader with no media, the machine cannot detect any
medium inserted into the reader subsequently.
• Removing your USB memory device or your Memory Card Reader from the front USB port
does not change the screen status. Press the
When the USB Drive has been detected. Screen Appears
1 Select Scan to USB.
When the Scan to USB Screen Appears
1 Go on to the next procedure.
NOTE:
• See "Change Destination".
When the Print from USB Screen Appears
1 Press the
button.
2 Select USB Scan to USB.
When the Screen Display Does Not Change
1 Press the
button.
248
|
Scanning
*1
can be used, but its safe
button to start the next operation.
*2
is used, only
Advertisement
Table of Contents
