Diagnostics
Displays the diagnostics menu.
Altitude Adjustment
Specify the altitude of the location where the printer is installed.
Color Calibration
Corrects the consistency of printing colors over time, environment, and print media.
Color Registration - Automatic
See "Adjusting Color Registration".
Color Registration - Manual
See "Adjusting Color Registration".
Image Position
Adjust the image position.
Scan Color Consistency
Adjust the scan color consistency.
Non-Dell Toner Cartridges
Enable or disable the Non-Dell Toner mode.
Fusing Unit Temperature Adjustment
Adjust the temperature of the fusing unit.
To lower the temperature, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. When the printed
paper has curled, try to lower the temperature. When the toner does not fuse on the
paper properly, try to increase the temperature.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Transfer Voltage Adjustment
Adjust the transfer voltage.
To lower the voltage, set negative values. To increase, set positive values.
The default settings may not give the best output on all paper types. If you see mottles on
the print output, try to increase the voltage. If you see white spots on the print output, try
to decrease the voltage.
NOTE:
• The print quality changes depending on the setting values you select for this item.
Hardware
Displays the maintenance menu for hardware.
77
Device
|