Table of Contents
Advertisement
The default value is 80.
NOTE:
• Do not use a number that is the same as a port number of another port. However, you can use the
same port number for a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,
WebDAV, and Web Services on Devices (WSD)).
PJL
Select this to enable PJL. PJL allows you to specify the printer language to use for your
next job regardless of the printer language currently being used.
Print Mode
Select a print mode. The available options are Auto, PostScript 3, HP-GL/2, PCL 6/5e,
and TIFF/JPEG. Selecting Auto enables the machine to automatically determine and use
the most suitable language to print data received from the host device.
TBCP Filter
Select this to enable TBCP filter for PostScript data. When the transmission data includes
binary data or EPS data, disable this.
Data Reception Timeout
Enter a timeout period for receiving data from Web Services on Devices (WSD) clients.
Notification Delivery Timeout
Enter the timeout period for delivering notification to Web Services on Devices (WSD)
clients.
Maximum IP Packet TTL
Enter a value for the maximum TTL.
Maximum Number of Subscribers
Enter the maximum number for reserved notification.
Permissions
176
|
Dell Printer Configuration Web Tool
Advertisement
Table of Contents
