Table of Contents
Advertisement
Notifications
Displays the notifications from the printer such as the fault status, replacement period,
and other important messages in the order of severity.
You can check the details or associated pages by selecting each notification.
Fault History
Selecting History displays Fault History.
The faults are displayed from newest to oldest in descending order.
Paper Trays
See "Trays".
Supplies
See "Supplies".
Billing/Usage
Selecting Billing/Usage allows you to check the billing information. The
Billing/Usage screen shows Serial Number, Counter and Usage Counters.
In the Usage Counters screen, you can check the detailed usage counters. You can
filter the counters by setting the filter (set to All by default) over the counter.
General
Measurements
Units
Allows you to select a unit of measurement displayed on the screen from Millimeters
and Inches.
Paper Size Preference
Allows you to select the unit of default paper size to be used for printer settings.
To use the A4 size paper for the following printer settings by default and to set the Units
setting to Millimeters, select Metric.
To use the Letter size paper for the following printer settings by default and to set the
Units setting to Inches, select Inch.
• Default paper size for printing
• Default document size for copying/scanning/faxing
• Default custom paper sizes displayed on the screen for each paper tray
• Default paper size of each paper tray and the bypass tray
Reading Order
Select a reading order. Show All allows you to select Left to Right or Right to
Left each time you scan a document.
64
|
Device
Advertisement
Table of Contents
