Configuring The Wireless Adapter - Dell 948 User Manual

Wireless Networking
3. Remove the Dell Wireless Adapter 1000 from the packaging.
Callout Item
1 Dell Wireless Adapter 1000
2 USB cable
3 MAC address label
4 Dell Wireless Adapter 1000 Installation Guide
4. Attach the MAC address label to the back of your printer.
5. Insert the adapter into the back of the printer until it clicks into place.
You are now ready to configure your adapter to work on your wireless network.

Configuring the Wireless Adapter

1. Plug the printer power cable into the wall outlet.
2. Press the Power button.
The Wireless Adapter detected message appears on the operator panel for three seconds.
3. If you are using your printer with a new Dell computer: Go to
If you are using your printer with an existing computer: Go to the next step.
4. Make sure your computer is on, and then insert the Drivers and Utilities CD.
5. Select Using a wireless network, and then click Next.
file:///T|/htdocs/systems/prn948/en/en/d0e9548.html[10/10/2012 11:05:25 AM]
step 8.