Removing the Reversal Motor
(M10)
■ Preparation
1. Remove the No.2 deleivery unit.
• 2 connectors
• 1 screw
2x
1x
• 2 screws
2x
2.
■ Procedure
1. Remove the reversal motor.
• 1 connector
• 2 screws
1x
Removing the Scanner Motor
(M31)
■ Preparation
1. Remove the ADF communication cable (only
machines with ADF installed).
2. Open the platen board cover or the ADF.
3. Remove the reader rear
Reader Rear Cover" on page 136
■ Remove the pressure roller.
1. Remove the scanner motor assembly.
• 1 connector
• 1 spring
• 2 screws
161
4. Disassembly/Assembly
2x
cover."Removing the