Canon imageRUNNER 2525 Series Service Manual page 274

8. Service Mode
■ PRINT NUMERIC
● 034: Left-end registration adjustment (manual feed tray)
Adjust the left-end registration margin of paper picked from a manual feed tray.
The larger the adjustment value, the wider the left-end margin of the image becomes.
● 035: Left-end registration adjustment (cassette 1)
Adjust the left-end registration margin of paper picked from cassette 1.
The larger the adjustment value, the wider the left-end margin of the image becomes.
● 036: Left-end registration adjustment (cassette 2)
Adjust the left-end registration margin of paper picked from cassette 2.
The larger the adjustment value, the wider the left-end margin of the image becomes.
● 037: Left-end registration adjustment (cassette 3)
Adjust the left-end registration margin of paper picked from cassette 3.
The larger the adjustment value, the wider the left-end margin of the image becomes.
● 038: Left-end registration adjustment (cassette 4)
Adjust the left-end registration margin of paper picked from cassette 4.
The larger the adjustment value, the wider the left-end margin of the image becomes.
● 053: Margin adjustment at the leading edge of the copy
Adjust the margin at the leading edge of the copy.
Increasing the value makes the margin at the leading edge larger.
● 054: Margin adjustment at the trailing edge of the copy
Adjust the margin at the trailing edge of the copy.
Increasing the value makes the margin at the trailing edge larger.
● 055: Margin adjustment at the right edge of the copy
Adjust the margin at the right edge of the copy.
Increasing the value makes the margin at the right edge larger.
● 056: Margin adjustment at the left edge of the copy
Adjust the margin at the left edge of the copy. Increasing the value makes the margin at the left edge larger.
● 058: Adjustment of the registration loop volume (Manual feed tray)
If there is a registration loop noise and abrasion while feeding the paper from the manual feed tray, registration loop noise and
abrasion could be reduced by adjusting the volume of the registration loop.
By making the value larger, loop volume will become bigger.
● 059: Adjustment of the registration loop volume. (Cassette)
If there is a registration loop noise and abrasion while feeding the paper from the cassette, registration loop noise and abrasion
could be reduced by adjusting the volume of the registration loop.
By making the value larger, loop volume will become bigger.
● 061: Adjustment of the registration loop volume. (Duplex unit)
If there is a registration loop noise and abrasion while feeding the paper from the duplex unit, registration loop noise and abrasion
could be reduced by adjusting the volume of the registration loop.
By making the value larger, loop volume will become bigger.
● 062:Temperature adjustment UP/DOWN mode. (For plain paper)
The temperature adjustment offset relative to the target fixing temperature of plain paper can be changed in steps of 3˚C. Use
this parameter when the fixing performance is low or when it is necessary to prevent the paper from slipping or being curled.
Plain paper: Plain paper mode, thin paper mode, S thin paper mode, OHP mode
0 - 2: +15˚C
3 - 11: +12 to -15˚C (in steps of 3˚C)
12- 14: -15˚C
264