Canon imageRUNNER 2525 Series Service Manual page 239

Detailed Discussions of Bit 1
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read in text mode.
Scanning direction in conversion follows the Bit 2 setting of SW14.
Detailed Discussions of Bit 2
Use it to enable/disable millimeter/inch conversion in sub scanning direction for images read in text/photo mode while bit 1 is set
to '1'.
Scanning direction in conversion follows the Bit 2 setting of SW14.
Detailed Discussions of Bit 3
Use it specify whether or not to transmit bit 33 and thereafter for the DIS signal.
If 'prohibit' is selected, Super Fine reception from a non-Canon machine can no longer be used.
CAUTION:
If 'prohibit' is selected, Super Fine reception from a non-Canon machine can no longer be used.
Detailed Discussions of Bit 4
Selects whether or not the recording paper length declared in the DIS signal is A4 size.
When receiving documents made up of long pages, to have the document divided into two pages at the transmitting fax, select
"A4 size".
NOTE:
When "A4 size" is selected, this fax uses the DIS signal to tell the transmitting fax that it is equipped with A4 size recording paper.
The transmitting fax that receives this DIS signal divides long pages into A4 size pages before transmitting it to the receiving fax.
Some fax models do not so divide long documents.
● SSSW-SW06
List of Functions
Bit
0 not used
1 not used
2 not used
3 FAX stamp display setting
4 original read width
5 not used
6 not used
7 not used
Detailed Discussions of Bit 3
Select whether to display the stamp menu in the user menu after installation of the optional stamp unit.
Detailed Discussions of Bit 4
Use it to select a read width for originals.
If 'LTR' is selected, the machine will read LTR originals at LTR width (214mm).
● SSSW-SW012
List of Functions
Bit
0 1-page time-out length for transmission
1
2 1-page time-out length for transmission
(HT transmission)
3
4 1-page time-out length for reception
Function
Function
229
1
-
-
-
Displayed
LTR
-
-
-
1
*
*
*
*
*
8. Service Mode
0
-
-
-
Not displayed
A4
-
-
-
0
*
*
*
*
*