Alarm Code; Alarm Code Details - Canon imageRUNNER 2525 Series Service Manual

Alarm Code

Alarm Code Details

Alarm Code
04 - 0011 Cassette 1 Paper Feed Retry error
04 - 0012 Cassette 2 Paper Feed Retry error
04 - 0013 Cassette 3 Paper Feed Retry error
04 - 0014 Cassette 4 Paper Feed Retry error
04 - 0017 Manual Feeder Paper Feed Retry error
10 - 0020 Toner (Bk) prior delivery alarm
10 - 0100 Toner cartridge replacement completion alarm
11 - 0001 Waste Toner Container full
11 - 0010 Waste Toner Container prior delivery alarm
31 - 0005 Environment Sensor reading alarm
37 - 0001 Repair Request (Corrupt Image)
37 - 0002 Repair Request (Paper Jam)
37 - 0003 Repair Request (Corrupt Image/Paper Jam)
37 - 0004 Repair Request (Other Problems)
Title
219
A. Movement /B. Cause /C. Measures
Movement: No change.
CAUSE: The paper does not picked up even if the pa-
per feed retry operation is carried out 4 times.
MEASURE: Check the pick-up/paper feed/separation
rollers. -> Check whether a scrap of paper remains
around the paper feed area or not.
Movement: No change.
CAUSE: The paper does not picked up even if the pa-
per feed retry operation is carried out 4 times.
MEASURE: Check the pick-up/paper feed/separation
rollers. -> Check whether a scrap of paper remains
around the paper feed area or not.
Movement: No change.
CAUSE: The paper does not picked up even if the pa-
per feed retry operation is carried out 4 times.
MEASURE: Check the pick-up/paper feed/separation
rollers. -> Check whether a scrap of paper remains
around the paper feed area or not.
Movement: No change.
CAUSE: The paper does not picked up even if the pa-
per feed retry operation is carried out 4 times.
MEASURE: Check the pick-up/paper feed/separation
rollers. -> Check whether a scrap of paper remains
around the paper feed area or not.
Movement: No change.
CAUSE: The paper does not picked up even if the pa-
per feed retry operation is carried out 4 times.
MEASURE: Check the paper feed roller and the sepa-
ration pad. -> Check whether a scrap of paper remains
around the paper feed area or not.
Movement: No change.
CAUSE: The remaining quantity of the toner became
the specific level or less.
MEASURE: Replace the toner Cartridge.
The replacement of the Toner Cartridge was detected.
Movement: A message "The waste toner container is
full." is displayed on the Control Panel, and the machine
is stopped.
Cause: The Waste Toner Container becomes full.
eplace the Waste Toner Container.
Movement: A message is displayed on the Control
Panel. (Continuous printing is enabled.)
Cause: Display of Waste Toner Container preparation
alarm Measures: Replace the Waste Toner Container.
Movement: It becomes as follow: environment temper-
ature= 0 degC, environment humidity= 0%.
Cause: Connection of the Environment Sensor cannot
be detected.
Measures:
1) Check the connection of the Environment Sensor
(HU1).
2) Replace the Environment Sensor (HU1).
-
-
-
-
7. Error/Jam/Alarm