Reverse Motor; Before Removing The Reversal Motor; Removing The Reversal Motor - Canon iR C1020 Series Service Manual

[4]
[3]
[3]
[1]
[2]
F-9-74
Points to Note at Installation
- Before installing the reverse unit [1] to the host machine, be sure to align
the gear unit [2] with the coupling [3] of the reverse unit.
- The gear unit [2] is easily detached from the coupling [3]. So, be sure to
keep pushing the gear unit [2] when installing the reverse unit [1] to the host
machine.
[4]
[3]
[4]
[3]
[4]
[3]
[4]
[5]

9.5.11 Reverse Motor

9.5.11.1 Before Removing the Reversal Motor

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the fixing assembly.(page 10-6)Reference [Removing the Fix-
ing Assembly]
3) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
4) Remove the ADF Unit + Reader Unit.(page 5-8)Reference [Removing
the ADF Unit + Reader Unit]
5) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
6) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]
7) Remove the Upper Frame Unit.(page 11-18)Reference [Removing the
Upper Frame Unit]
8) Remove the Reversal Unit.(page 9-26)Reference [Removing the Re-
versal Unit]

9.5.11.2 Removing the Reversal Motor

1) Remove the belt [2] from the motor gear [1].
Chapter 9
[2] [1]
[6]
0019-5845
0019-5846
9-27