Canon imageRUNNER 2525 Series Service Manual page 247

Detailed Discussions of Bit 4
Select whether to set the IC card authentication function.
When "1" is selected, the function is set.
When "0" is selected, the function is not set.
Detailed Discussions of Bit 5
You can select whether to stop the scan job at the time of device log logout.
Selecting "1" stops the scan job.
Selecting "0" does not stop the scan job.
Detailed Discussions of Bit 6
This is the setting to display the stop confirmation screen when the stop key is pressed during a scan job, except remote scan.
Selecting "1" hides the stop confirmation screen.
Selecting "0" displays the stop confirmation screen.
Detailed Discussions of Bit 7
You can set to display/hide the start button of the counter print (known as billing counter report).
Selecting "1" displays the counter print button.
Selecting "0" hides the counter print button.
● SSSW-SW36
List of Functions
Bit Function
0 Service switch to disable auSend
Default: 0
1 Switch to display/hide the automatic shutdown
time setting screen
2 Change of [User Management Settings] after
import of DCM file
3 not used
4 not used
5 not used
6 not used
7 not used
Detailed Discussions of Bit 0
You can select whether to disable the auSend function.
Selecting "1" disables auSend. You can hide the setting item of auSend in RUI/LUI.
Selecting "0" follows the RUI setting to enable/disable auSend. auSend display in RUI/LUI is not affected.
Details of [Bit 1]
Set whether to display the automatic shutdown time setting screen.
Selecting "1" displays the setting screen.
Selecting "0" does not display the setting screen.
Initial value:
For Europe: 1
For locations other than Europe: 0
Details of [Bit 2]
When setting information of [Settings/Registration] menu is imported using DCM function, the user management settings are
forcibly disabled. However, it is not forcibly disabled by setting this item to "1".
Selecting "1" does not change the user management settings.
Selecting "0" forcibly disable the user management settings.
Initial value: 0
1
Disable auSend. You can hide the set-
ting item of auSend in RUI/LUI.
Display the automatic shutdown time
setting screen (Enable the automatic
shutdown function)
No change
-
-
-
-
-
237
8. Service Mode
0
Enabling/disabling of auSend follows
the RUI setting.
auSend display in RUI/LUI is not affec-
ted.
Not display the automatic shutdown
time setting screen (Disable the auto-
matic shutdown function)
Forced OFF
-
-
-
-
-