Canon imageRUNNER 2525 Series Service Manual page 355

13. Install the Heater PCB.
• 1 Screw (RS Tightening; M3x8)
1x
14. Connect the connector of the shorter harness of the
Heater SW Harness to the Heater PCB.
• 1 Connector
1x
RS Tightening; M3x8
345
15. Unlock the wire saddles and stretch the folded
harness as shown in the figure. Then connect the
connector to the Heater PCB.
• 2 Wire saddles
• 1 Connector
2x
1x
9. Installation