2. Tighten the 2 stepped screws (RS tightening;
M4X18) to the Reader Right Cover.
Stepped Screw
RS tightening ; M4x18
2x
3. Hook the cut-off of the Document Tray (Reinforcing
Plate) to the stepped screws tightened in the step 2).
Stepped Screw
Stepped Screw
Cut-off
323
■ When installing with "USB
Application 3-Port Interface Kit-A1"
simultaneously
1. Tighten the 2 stepped screws (RS tightening;
M4X18) to the USB Application 3-Port Interface Kit.
RS tightening ; M4x18
2x
2. Hook the cut-off of the Document Tray (Reinforcing
Plate) to the stepped screws tightened in the step 1).
Stepped Screw
9. Installation
Stepped Screw
Cut-off