Canon imageRUNNER 2525 Series Service Manual page 321

[
caution label x 1
(for Australia and EU
supplied with an ADF
<A type>)
caution label 1 x 1
(only for the model
for EU with an ADF)
caution label 2 x 1
(only for the model
for US with an ADF)
(only for the model
with 250-sheet cassette 1
and 550-sheet cassette 2)*1
*1: The connecting fixture is used for the following case. For attaching the fixture, see the CST. Feeding Unit-AE1 installation
procedure.
• When the CST. Feeding Unit-AE1 is installed to the host machine after removing the lower cassette (550-sheet cassette)
from the host model which is equipped with the 250-sheet cassette, cassette spacer and 550-sheet cassette.
<Others>
Including guides
Glass cleaning/lamp
caution label x 1
(for Australia and EU
supplied with an ADF
<AB/INCH type>)
Finger pinch
caution label 1:x 1
(only for the model
for US with an ADF)
Finger pinch
(only for Australia model)
Connecting Fixture x 1
(M3x8.5) x 1
(only for the model
with 250-sheet cassette 1
and 550-sheet cassette 2)*1
Glass cleaning/lamp
x 1
(only for iR2530/2525/
2520 supplied with an ADF)
Finger pinch
caution label 2 x 1
(only for the model
for EU with an ADF)
TP screw (M3 x 6) x 1 [24]High temperature
caution label x 1
(only for the model
for CN and
with 250-sheet cassette 1
and 550-sheet cassette 2)
RS tightening screw
311
9. Installation
Document size label
Finger pinch