19. Remove the screw of the left cover, and then distort
it to remove the inside base cover.
• 1 Screw
• 2 Bosses
• 2 Hooks
• 2 Protrusions
1x
20. Remove the left cover.
1. Except for Europe model
• 1 Screw
CAUTION:
There is the link rod behind the left cover, which is
engaged to the switch on the power supply unit. So
carefully remove the left cover not to give an excessive
load on the link rod.
Link rod
NOTE:
When reinstalling the left cover, surely insert the link rod
in the switch on the power supply unit so that the switch
can link to the main power switch of the host machine.
372
9. Installation
1x