Canon imageRUNNER 2525 Series Service Manual page 154

■ Procedure
1. Remove the toner supply assembly.
• Remove the power cable.
• 2 connectors
• 4 screws
CAUTION:
When removing the toner supply unit, do not incline it
to shed toner.
2x 4x
■ Action to Take after Replacement
NOTE:
The service parts for toner supply unit do not come with a
bottle ring. Remove the bottle ring from the old toner
supply unit and attach it to the new one.
The procedure is as follows:
1. Remove the toner bottle set lever.
• 1 parallel pin
2. Remove the bottle base.
• 1 screw
• 1 claw
1x
Claw
3. Remove the bottle ring.
144
4. Disassembly/Assembly
1x