Canon imageRUNNER 2525 Series Service Manual page 380

10. Remove the developing stay. (Removed developing
stay is no longer used.)
• 1 Wire saddle
• 2 Screws
1x
2x
11. Remove the rear cover (right).
• 3 Screws
• 2 Claws
3x
Claws
12. Remove the connector cover.
• 1 Screw
1x
13. Disconnect all the connectors at the place shown in
the figure. (This is performed only when the optional
cassette unit is installed.)
• Connectors (All)
370
9. Installation