How To Use; Report Display Function - Canon imageRUNNER 2525 Series Service Manual

• Service mode is not accessed from the Control Panel
• The remote UI is enabled in the settings on the Control Panel
[Settings/Registration] > [System Settings] > [Remote UI Settings] > [Use Remote UI] > [ON]
• The RMT-SW (remote UI service mode function) setting is enabled (set to 1) in service mode
• SERVICE MODE > SYSTEM > RMT-SW
0: OFF, 1: ON (default)

How to Use

1. Activate the Web browser, and access the following URL:
http://<Host machine's IP address or host name>/servicemode.html
2. Enter the password, and click [LOGIN].
* Password required for authentication differs depending on the following service mode setting:
• SERVICE MODE > OPTION GR. > PSWD-SW
Combinations of PSWD-SW setting value and password required for authentication
PSWD-SW Password required for authentica-
setting
value
0 • Password of remote UI service mode
1 • Password of remote UI service mode
• Service mode password
2 • Password of remote UI service mode
• User's system administrator ID
• Password of system administrator
• Service mode password
3. When finishing the operation, click [LOGOUT].
NOTE:
If the user logged in and then closed the browser without logging out, connection status remains as "logged in". If the user attempts
to log in to service mode while being logged in, exclusive control is executed so that the user cannot access service mode. In that
case, wait for a fixed time (3 minutes) from the last access to let the user be automatically logged out, or turn OFF/ON the power
of the machine to be forcibly logged off.

Report Display Function

In remote UI service mode, various reports that are usually checked from printouts can be checked by displaying them on screen
if the user access service mode from the Control Panel.
Reports that can be checked using this function are as follow:
• Service Mode > SERVICE REPORT > OUTPUT > SERVICE DATA LIST
• Service Mode > SERVICE REPORT > OUTPUT > SYSTEM DATA LIST
• Service Mode > SERVICE REPORT > OUTPUT > SYSTEM DUMP LIST
• Service Mode > SERVICE REPORT > OUTPUT > COUNTER LIST
• Service Mode > SERVICE REPORT > OUTPUT > ERROR LOG LIST
• Service Mode > SERVICE REPORT > OUTPUT > SPEC LIST
• Service Mode > SERVICE REPORT > OUTPUT > ERDS COM LOG LIST
tion
303
Authentication screen
8. Service Mode