Canon imageRUNNER 2525 Series Service Manual page 215

Ecode Detail Code
E520 0002
E531 8001
E531 8002
E532 0001
E532 0002
E540 0001
E540 0005
E542 0001
E542 0005
E567 0001
Item
Remedy 1.Replace the Shift Roller HP Sensor (S2).
2.Replace the Shift Motor (M4).
3.Replace the Finisher Controller PCB (PCB1).
Title Stapler Motor (M10) error
Description The stapler does not leave the staple home position when the Sta-
ple Motor (M10) has been driven for 0.5 sec.
Remedy 1.Check the wiring between the Finisher Controller PCB and Sta-
pler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
Title Stapler Motor (M10) error
Description The stapler does not return to the staple home position when the
Stapler Motor (M10) has been driven for 0.5 sec.
Remedy 1.Check the wiring between the Finisher Controller PCB and Sta-
pler.
2.Replace the Stapler.
3.Replace the Finisher Controller PCB (PCB1).
Title STP Move Motor (M1) error
Description The stapler does not leave the stapler move home position when
the STP Move Motor (M1) has been driven for 0.25 sec.
Remedy 1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and the
STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
Title STP Move Motor (M1) error
Description The stapler does not return to the stapler move home position
when the STP Move Motor (M1) has been driven for 2.8 sec.
Remedy 1.Replace the Stapler Move HP Sensor (S10).
2.Check the wiring between the Finisher Controller PCB and the
STP Move Motor.
3.Check the stapler shift base.
4.Replace the STP Move Motor (M1).
5.Replace the Finisher Controller PCB (PCB1).
Title Tray Lift Motor (M11) time out error
Description The stack tray does not move within a specified time period.
Remedy 1.Replace the Tray Lift Motor (M11).
2.Replace the Finisher Controller PCB (PCB1).
Title Tray Lift Motor (M11) closing detect switch error
Description The FG input cannot be detected when the Tray Lift Motor (M11)
has been driven for 0.1 second.
Remedy 1.Replace the Stack Tray Clock Sensor (S13).
2.Replace the Tray Lift Motor (M11).
3.Replace the Finisher Controller PCB (PCB1).
Title Additional Tray Lift Motor (M12) time out error
Description The stack tray does not move within a specified time period.
Remedy 1.Replace the Additional Tray Lift Motor (M12).
2.Replace the Finisher Controller PCB (PCB1).
Title Additional Tray Lift Motor (M12) closing detect switch error
Description The FG input cannot be detected when the Additional Tray Lift
Motor (M12) has been driven for 0.1 second.
Remedy 1.Replace the Additional Tray Clock Sensor (S23).
2.Replace the Additional Tray Lift Motor (M12).
3.Replace the Finisher Controller PCB (PCB1).
Title Shift Roller Release Motor (M5) error
Description The shift roller does not leave the shift roller release home position
when the Shift Roller Release Motor (M5) has been driven for 0.1
sec.
205
7. Error/Jam/Alarm
Description