The 1010P Keypad; Keypad Function Chart; Introduction To The 1010P Menu Screens - Siemens SITRANS F Operating Instructions Manual

Section 1
1.7

THE 1010P KEYPAD

The 1010P integral keypad provides 32 numeric and function keys (see table below). Use these keys to
enter, review or edit the site data. Certain keys control the graphics display, Datalogger and Totalizer.
"Blind Models," having no keypad or display, must be set up by using their serial data port.
KEY
MENU
ENT
LEFT, RIGHT ARROWS
UP, DOWN ARROWS
CLR
NUMBERS 0-9
DECIMAL POINT
MATH OPERATORS
"F" KEYS 1-3
"F4" KEY
CTL & ALT
DATALOG
PLUS/MINUS [+/-]
NOTE: The keypad does not have alphabetic keys. Scrolling lists provide alpha-numeric char-
acters as needed.
1.8

INTRODUCTION TO THE 1010P MENU SCREENS

The figure below shows a typical 1010P menu screen (e.g., Pipe Data Menu).
Menu Prompt Line
Reverse video)
Highlighted
Menu cell
Menu cell
Left-hand column)

KEYPAD FUNCTION CHART

Press to activate the Installation Menu.
Press <ENT> to store numeric data, select from option lists, etc.
Menu navigation keys move cursor in respective directions.
Same as <Left> and <Right>. Also scrolls option list and graphic
display screen.
Clear Key for erasing data, or selecting list options.
Use to type numeric data.
Use for decimal points in numeric data.
Allows 4-function math operations in numeric entry cells.
Totalizer control and special function keys.
CAUTION: SYSTEM RESET KEY (during power up)
Used as shift keys for alternate key functions.
Triggers immediate Datalogger report.
Changes the sign of numeric data.
Current
Selected
Meter Type
Siemens 2 Channel [1]
Select Pipe Class from Pipe Table
Select Pipe Class
Select Pipe Size
Pipe OD <in>
Pipe Material
Wall Thickness
Liner Material
Liner Thickness
Pipe Data
Current
Selected Menu
TYPICAL INSTALLATION MENU SCREEN
1-10
USAGE
Current Selected
Measurement
Channel
SITE 1
Copper Tube Table
1" type K
0.500
Steel
0.100
None
0.000
1010PFM-3G
Highlighted
Data
Menu cell data
(right-hand column)