Table of Contents
Advertisement
Table 61 Hardware Monitor Commands Summary (continued)
COMMAND
hw-monitor fan-speed-threshold
<index> <high> <low>
hw-monitor temperature-threshold
<slot> <index> <high> <low>
hw-monitor voltage-threshold
<slot> <index> <high> <low>
11.4 Running Configuration Commands
Use these commands to back up and restore configuration and firmware.
This table describes the commands.
Table 62 Running Configuration Commands Summary
COMMAND
copy running-config interface
dsl <slot>/<port> <slot/
portlist> [<attribute>
[<...>]]
copy running-config interface
ge-nni <port> <portlist>
[<attribute> [<...>]]
copy running-config interface
voip <slot>/<port> <slot/
portlist> [<attribute>
[<...>]]
erase running-config
erase running-config
interface dsl <slot/portlist>
[<attribute> [<...>]]
IES4005M User's Guide
DESCRIPTION
Sets the high and low fan speed limits for raising an alarm on the
specified fan.
: 1-3
index
: 0-15000 in RPM
high
: 0-15000 in RPM
low
Sets the high and low temperature limits for raising an alarm on
the specified module and sensor.
:
,
is the control card.
slot
1-5
1
: 1-10
index
: -50-100 in degree Celsius
high
: -50-100 in degree Celsius
low
Sets the high and low voltage limits for raising an alarm on the
specified module and sensor.
:
,
is the control card.
slot
1-5
1
: 1-3
index
: 0-25000 in mV
high
: 0-25000 in mV
low
DESCRIPTION
Clones (copies) the attributes from the specified DSL port to other DSL
ports. Optionally, copies the specified attributes from one port to other
ports.
Clones (copies) the attributes from the specified GE NNI port to other
GE NNI ports. You can specify a single port <1>, all ports <*> or a list
of ports <1,2>. You can also include a range of ports <1-2>.
Clones (copies) the attributes from the specified VoIP port to other
VoIP ports. Optionally, copies the specified attributes from one port to
other ports.
Resets the IES to the factory default settings.
Resets the specified DSL ports to the factory default settings on a per-
port basis and optionally on a per-feature configuration basis.
Chapter 11 Management
are the line cards.
2-5
are the line cards.
2-5
M
P
C
13
C
13
C
13
M
P
E
13
E
13
E
13
E
13
E
13
89
Advertisement
Table of Contents
Troubleshooting
