ZyXEL Communications IES4005M User Manual page 90

Chapter 11 Management
Table 62 Running Configuration Commands Summary (continued)
COMMAND
erase running-config
interface ge-nni <portlist>
[<attribute> [<...>]]
erase running-config
interface voip <slot/
portlist> [<attribute>
[<...>]]
show running-config [page]
show running-config interface
dsl <slot/portlist>
[<attribute> [<...>]]
show running-config interface
voip <slot/portlist>
[<attribute> [<...>]]
show running-config interface
ge-nni <portlist>
[<attribute> [<...>]]
90
DESCRIPTION
Resets the specified GE NNI ports to the factory default settings on a
per-port basis and optionally on a per-feature configuration basis. You
can specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
Resets the specified VoIP ports to the factory default settings on a per-
port basis and optionally on a per-feature configuration basis.
Displays the current configuration file. This file contains the commands
that change the IES's configuration from the default settings to the
current configuration. Optionally, displays current operating
configuration page by page.
Displays the current DSL configuration on a port-by-port basis.
Displays the current VoIP configuration on a port-by-port basis.
Displays the current GE NNI configuration on a port-by-port basis. You
can specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
M P
E 13
E 13
E 13
E 13
E 13
E 13
IES4005M User's Guide