ZyXEL Communications IES4005M User Manual page 138

Chapter 16 Multicast
• leave message handling mode: fast-leave
• last member query timer: 200 ms, robustness 1
• general query timer: 60 seconds, robustness 1 and 5 seconds for the maximum response time
Finally, it displays the IGMP/MLD settings so you can check them.
ras# config
ras(config)# igmp-mld snooping
ras(config)# igmp-mld version igmpv3
ras(config)# igmp-mld leave-mode fast-leave
ras(config)# igmp-mld last-member-query timer query-interval 200 robustness 1
ras(config)# igmp-mld general-query timer query-interval 60 robustness 1 max-response-time 5
ras(config)# exit
ras# show igmp-mld
mode:snooping
version:igmpv3
leavemode:fast-leave
general query timer:
interval:60 (sec)
robustness:1
max response
last member query timer:
interval:200(ms)
robustness:1
ras#
This example shows the ACL multicast settings, and how to drop unknown multicast packets and
forward multicast packets from DSL subscribers.
ras# show acl multicast
The multicast packets from upstream direction for IPv4 : drop
The multicast packets from upstream direction for IPv6 : drop
The unknown multicast packets for IPv4 : forward
The unknown multicast packets for IPv6 : forward
ras# config
ras(config)#
ras(config)#
ras(config)# exit
ras# show acl multicast
The multicast packets from upstream direction for IPv4 :
The multicast packets from upstream direction for IPv6 :
The unknown multicast packets for IPv4 :
The unknown multicast packets for IPv6 :
ras#
138
time:5 (sec)
no acl multicast upstream inactive
no acl multicast unsolicited
forward
forward
drop
drop
IES4005M User's Guide