ZyXEL Communications IES4005M User Manual page 99

Table 69 aaa command summary (continued)
Command
no aaa server accounting tacacs+
mode
no aaa server accounting tacacs+
timeout
show aaa server accounting tacacs+
aaa server authorization tacacs+
index <1-2>
address <ip-address>
port <1-65535>
secret <secret>
aaa server authorization tacacs+
mode <index-priority|round-robin>
aaa server authorization tacacs+
timeout <timeout>
no aaa server authorization tacacs+
index <index>
no aaa server authorization tacacs+
mode
no aaa server authorization tacacs+
timeout
show aaa server authorization
tacacs+
aaa authentication enable <method>
[<method>...]
aaa authentication login <method>
[<method> ...]
show aaa authentication
no aaa authentication
no aaa authentication enable
no aaa authentication login
IES4005M User's Guide
Description
Resets the accounting server's index-priority or round-robin mode to
the default.
Resets the timeout value to the default.
Displays all TACACS+ accounting server settings.
Configures an entry of TACACS+ authorization server settings.
Sets the authorization server's IP address.
Sets the authorization server's port.
Sets a secret password shared with the authorization server.
secret: 1~31 printable characters
Specifies how the IES decides which TACACS+ authorization server to
choose if you configure multiple servers.
index-priority: The IES tries to send authorization requests to the
first configured authorization server. If the authorization server does
not respond, then the IES tries to send requests to the second
authorization server.
round-robin: The IES alternates the sending of logs between the
configured authorization server settings.
Specifies the amount of time (in seconds) that the IES can wait for a
request response from the TACACS+ authorization server.
In index-priority mode, the timeout is divided by the number of
servers you configure. For example, if you configure two servers and
the timeout is 30 seconds, then the IES waits 15 seconds for a
response from each server.
Clears the specified TACACS+ authorization server's settings.
Resets the TACACS+ authorization mode to the default.
Resets the TACACS+ timeout value to the default.
Displays all TACACS+ authorization server settings.
Sets the authentication methods to authenticate users' access
privilege levels and sets the order. If the IES fails to get a request
response in time through the first method, the IES uses the second
method.
method: local or tacacs+
Sets the authentication methods to authenticate user login and the
order for using them.
method: local, radius or tacacs+
Displays the enable and login authentication method settings.
Resets both the enable and login authentication method settings to
their defaults.
Resets the enable authentication method settings to the default.
Resets the login authentication method settings to the default.
Chapter 11 Management
M P
C 13
C 13
E 3
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 3
C 13
C 13
E 3
C 13
C 13
C 13
99