Command Examples - ZyXEL Communications IES4005M User Manual

Table 91 IGMP/MLD Commands Summary (continued)
COMMAND
igmp-mld max-group <max-
group-cnt>
igmp-mld group-privilege
no igmp-mld group-privilege
igmp-mld cac bandwidth
<bandwidth>
no igmp-mld cac
igmp-mld group-privilege-
profile <group-privilege-
profile>
no igmp-mld group-privilege-
profile <group-privilege-
profile>
show interface dsl <slot/
portlist> igmp-mld
show igmp-mld group
show igmp-mld statistics
clear igmp-mld statistics
show interface dsl <slot/
portlist> igmp-mld group
clear interface dsl <slot/
portlist> igmp-mld statistics
show interface dsl <slot/
portlist> igmp-mld statistics
show interface dsl <slot/
portlist> igmp-mld log
clear interface dsl <slot/
portlist> igmp-mld log
acl multicast unsolicited
acl multicast upstream inactive
no acl multicast unsolicited
no acl multicast upstream
inactive
show acl multicast

16.1.1 Command Examples

Note: Before you can use an interface, you have to activate (provision) the corresponding
slot. See
This example shows how to enable IGMP snooping on the IES with the following settings:
• IGMP version 3
IES4005M User's Guide
DESCRIPTION
Configures the maximum group counts on the specified DSL ports.
max-group-cnt
Enables group privilege checking on the specified DSL ports.
Disables group privilege checking on the specified DSL ports.
Enables multicast bandwidth CAC control and configures the
maximum multicast bandwidth.
: 0-100 in Mbps
bandwidth
Disables multicast bandwidth CAC control.
Applies the group privilege profile to the specified DSL ports.
group-privilege-profile
Removes the group privilege profile from the specified DSL ports.
Displays IGMP/MLD settings on the specified DSL ports.
Displays all joined multicast groups.
Displays IGMP/MLD packet statistics.
Clears IGMP/MLD packet statistics.
Displays joined multicast groups on the specified DSL ports.
Clears IGMP/MLD packet statistics on the specified DSL ports.
Displays IGMP/MLD packet statistics on the specified DSL ports.
Displays the IGMP/MLD program log for the specified DSL ports.
Clears the IGMP/MLD program log for the specified DSL ports.
Forwards unknown multicast packets.
Drops multicast packets from the upstream direction.
Drops unknown multicast packets.
Forwards multicast packets from the upstream direction.
Displays ACL settings for multicast packets.
Section 12.1.1 on page 107
: 1-16
: up to 31 printable characters
for how to activate a slot.
Chapter 16 Multicast
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13
E 13
E 13
E 13
E 13
E 13
E 13
E 13
E 13
C 13
C 13
C 13
C 13
E 13
137