ZyXEL Communications IES4005M User Manual page 104

Chapter 11 Management
Table 71 performance management commands summary (continued)
Command
15min-collision-threshold
<threshold>
15min-64octets-threshold
<threshold>
15min-127octets-threshold
<threshold>
15min-255octets-threshold
<threshold>
15min-511octets-threshold
<threshold>
15min-1023octets-threshold
<threshold>
15min-1518octets-threshold
<threshold>
15min-1522octets-threshold
<threshold>
interface ge-nni <portlist>
alarm-profile <alarm-
profile>
clear interface ge-nni <portlist>
performance
show interface ge-nni <portlist>
performance <current|15-min|1-
day>
no voip alarm-profile <alarm-
profile>
show voip alarm-profile [alarm-
profile]
voip alarm-profile <alarm-
profile>
exit
15min-rtpelapse-threshold
<threshold>
15min-rtptxbytes-threshold
<threshold>
15min-rtprxbytes-threshold
<threshold>
15min-rtptxpkts-threshold
<threshold>
15min-rtprxpkts-threshold
<threshold>
15min-rtptxlostpkts-
threshold <threshold>
15min-rtprxlostpkts-
threshold <threshold>
interface voip <slot/portlist>
104
Description
Configures the number of frames for which transmission failed due to
excessive collisions allowed to receive/transmit in any 15-minute
period. Excessive collision is defined as the number of maximum
collisions before the retransmission count is reset.
Configures the number of frames 64 octets or less in length allowed to
receive/transmit in any 15-minute period.
Configures the number of frames 65 to 127 octets in length allowed to
receive/transmit in any 15-minute period.
Configures the number of frames 128 to 255 octets in length allowed to
receive/transmit in any 15-minute period.
Configures the number of frames 256 to 511 octets in length allowed to
receive/transmit in any 15-minute period.
Configures the number of frames 512 to 1023 octets in length allowed
to receive/transmit in any 15-minute period.
Configures the number of frames 1024 to 1518 octets in length allowed
to receive/transmit in any 15-minute period.
Configures the number of frames 1519 to 1522 octets in length allowed
to receive/transmit in any 15-minute period.
Enters the sub-command mode for configuring the specified GE ports.
Applies the specified alarm profile to the port(s).
Clears current, historical 15-minutes and historical 1-day Ethernet line
status on the specified GE ports.
Displays current, historical 15-minutes and historical 1-day Ethernet
line status on the specified GE ports.
Deletes the specified VoIP alarm profile.
Displays all or the specified VoIP alarm profile.
Enters the sub-command mode for configuring the specified VoIP alarm
profile.
Leaves the sub-command mode.
Configures the accumulated time of RTP sessions allowed in any 15-
minute period. In other words, this is the amount of audio transmission
time allowed within 15 minutes.
Configures the accumulated number of bytes of RTP packets that can
be transmitted in any 15-minute period.
Configures the accumulated number of bytes of RTP packets that can
be received in any 15-minute period.
Configures the number of RTP packets that can be transmitted in any
15-minute period.
Configures the number of RTP packets that can be received in any 15-
minute period.
Configures the number of RTP packets that can be lost during
transmission in any 15-minute period.
Configures the number of RTP packets that can be failed to be received
by the IES in any 15-minute period.
Configures specified VoIP UNI ports.
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13
E 13
C 13
E 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
IES4005M User's Guide