Table of Contents
Advertisement
Chapter 13 Switch Features
13.5 GE Uplink Commands
Use these commands to configure the Gigabit Ethernet uplink ports.
This table describes the commands.
Table 80 GE Uplink Commands Summary
COMMAND
show interface ge-nni <portlist>
interface ge-nni <portlist>
exit
inactive
no inactive
name <port-name-string>
no name
speed-duplex auto|10-
half|10-full|100-half|100-
full|1000-full|1000-fiber
no speed-duplex
clear interface ge-nni <portlist>
performance
clear interface ge-nni <portlist>
statistics
show interface ge-nni <portlist>
statistics
show interface ge-nni <portlist>
status
116
DESCRIPTION
Displays the configuration of the specified Gigabit Ethernet uplink
ports. You can specify a single port <1>, all ports <*> or a list of
ports <1,2>. You can also include a range of ports <1-2>.
Configures the specified Gigabit Ethernet uplink ports. You can
specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
Leaves the Gigabit Ethernet uplink port configuration.
Disables the Gigabit Ethernet uplink ports.
Enables the Gigabit Ethernet uplink ports.
Sets a name of up to 31 printable characters for the Gigabit
Ethernet uplink ports.
Resets the name of the port to the default.
Configures the Gigabit Ethernet port's speed and duplex mode.
The default is auto.
auto: auto negotiation
10-half fixed to 10Base-T half duplex
10-full fixed to 10Base-T full duplex
100-half fixed to 100Base-TX half duplex
100-full fixed to 100Base-TX full duplex
1000-full fixed to 1000Base-T full duplex
1000-fiber fixed to 1000Base-X full duplex
Resets the Gigabit Ethernet port's speed and duplex mode to the
default.
Clears the current or historical 15-minutes and 1-day interface
status for the specified Gigabit Ethernet uplink ports. You can
specify a single port <1>, all ports <*> or a list of ports <1,2>.
You can also include a range of ports <1-2>.
Clears packet statistics for the specified port. You can specify a
single port <1>, all ports <*> or a list of ports <1,2>. You can
also include a range of ports <1-2>.
Displays packet statistics for the specified port. You can specify a
single port <1>, all ports <*> or a list of ports <1,2>. You can
also include a range of ports <1-2>.
Displays the current interface status for the specified ports. You
can specify a single port <1>, all ports <*> or a list of ports
<1,2>. You can also include a range of ports <1-2>.
M
P
E
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
C
13
E
13
E
13
E
13
E
13
IES4005M User's Guide
Advertisement
Table of Contents
Troubleshooting
