ZyXEL Communications IES4005M User Manual page 176

Chapter 24 VDSL
Table 116 VDSL Commands Summary (continued)
COMMAND
xtur-15min-errcoding-
threshold <threshold>
xtur-15min-corrected-
threshold <threshold>
no dsl line-template <name>
show dsl line-template [name]
dsl line-template <name>
exit
channel-profile <name>
line-profile <name>
no dsl alarm-template <name>
show dsl alarm-template <name>
dsl alarm-template <name>
exit
alarm-channel-profile <name>
alarm-line-profile <name>
interface dsl <slot/portlist>
exit
active
no active
name <port-name-string>
line-template <line-template>
alarm-template <alarm-
template>
show interface dsl <slot/
portlist> config
show interface dsl <slot/
portlist> lineinfo
show interface dsl <slot/
portlist> linerate
show interface dsl <slot/
portlist> status
176
DESCRIPTION
Configures the number of Code Violations (incorrect cyclic
redundancy check) allowed on the subscriber devices within 15
minutes. 0- 2147483647, default: 0.
Configures the number of corrected error blocks allowed on the
subscriber devices within 15 minutes. 0- 2147483647, default: 0.
Removes the specified DSL line template.
Displays the names of all the DSL line templates if a name is not
specified or the contents of the specified DSL line template.
Enters the sub-command mode for configuring the specified DSL
line template.
Leaves the DSL line template configuration sub-command mode.
Configures the referenced DSL channel profile. Default: DEFVAL
Configures the referenced DSL line profile. Default: DEFVAL
Removes the specified DSL alarm template.
Displays the names of all the DSL alarm templates if a name is not
specified or the contents of the specified DSL alarm template.
Enters the sub-command mode for configuring the specified DSL
alarm template.
Leaves the DSL alarm template configuration sub-command
mode.
Configures the referenced DSL alarm channel profile. Default:
DEFVAL
Configures the referenced DSL alarm line profile. Default: DEFVAL
Enters the sub-command mode for configuring the specified DSL
ports.
Leaves the DSL port configuration.
Enables the specified DSL port(s) on the IES.
Disables the specified DSL port(s) on the IES.
Sets a name of up to 31 printable characters for the port(s).
default:
Configures the referenced DSL line template to the specified DSL
ports.
: up to 31 printable characters
line-template
Configures the referenced DSL alarm template to the specified
DSL ports.
: up to 31 printable characters, default is
line-template
DEFVAL
Displays the DSL configuration of the specified DSL ports.
Displays the current 15 minutes DSL line information for the
specified DSL ports.
Displays the current 15 minutes DSL line rate for the specified
DSL ports.
Displays the current 15 minutes DSL line status for the specified
DSL ports.
M P
C 13
C 13
C 13
E 13
C 13
C 13
C 13
C 13
C 13
E 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
E 13
E 13
E 13
E 13
IES4005M User's Guide