ZyXEL Communications IES4005M User Manual page 110

Chapter 13 Switch Features
Table 75 ACL Commands Summary (continued)
COMMAND
acl <acl-profile>
no acl <acl-profile>
acl-profile <name>
Use the following sub-commands to set the rules for the ACL profile.
ether-type <etype>
source-mac <mac>
dest-mac <mac>
source-oui <oui>
dest-oui <oui>
inner-vlan <vid>
outer-vlan <vid>
inner-pbit <pbit>
outer-pbit <pbit>
source-ip range <ip>/<mask>
dest-ip range <ip>/<mask>
source-ip <ip>
dest-ip <ip>
protocol <protocol>
ip-precedence <precedence>
dscp <dscp>
source-ipv6 <ipv6>
dest-ipv6 <ipv6>
next-header <next-header>
traffic-class <traffic-class>
source-l4-port range <start-
port> <end-port>
110
DESCRIPTION
Use the specified ACL profile for the ports.
Do not use the specified ACL profile for the ports.
Creates an ACL profile and enters the sub-command mode for
configuring it.
name: up to 31 printable characters
Specifies an Ethernet type.
etype: Ethernet type in hexadecimal (0000-FFFF).
Specifies a source MAC.
Specifies a destination MAC.
Specifies a source MAC Organization Unit Identifier (OUI).
oui: 00:00:00-FF:FF:FF
Specifies a destination MAC Organization Unit Identifier (OUI).
Specifies an inner VLAN ID.
Specifies an outer VLAN ID.
Specifies an inner VLAN priority bit.
pbit: 0-7
Specifies an outer VLAN priority bit.
Specifies a source IP range.
mask: 16-32
Specifies a destination IP range.
Specifies a source IP address.
Specifies a destination IP address.
Specifies an IP protocol.
protocol: 0-255
Specifies an IP precedence.
precedence: 0-7
Specifies an IP DSCP.
dscp: 0-63
Specifies a source IPv6 address.
Specifies a destination IPv6 address.
Specifies an IPv6 next header.
next-header: 0 ~ 255
Specifies an IPv6 traffic class.
traffic-class: 0 ~ 255
Specifies a layer 4 source port range.
start-port: 0-65535
end-port: 0-65535
M P
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
C 13
IES4005M User's Guide