Privilege Levels, Accounts And Passwords - ZyXEL Communications IES4005M User Manual

Chapter 9 The CLI
The P column identifies the level of the command.

9.6 Privilege Levels, Accounts and Passwords

Every command has a level (0-14). Users can run a command if the session's level is greater than
or equal to the command's level. The session's level initially comes from the login account's level,
though it is possible to change the session's level after logging in.
The following table summarizes the types of commands at each of these levels.
Table 52 Types of Commands at Different Levels
LEVEL TYPES OF COMMANDS AT THIS LEVEL
0 Ping, IPv6, enable, and logout.
1 Display basic system information.
3 Display configuration or status.
13 Configure features except for login accounts, login precedence, multiple logins, and administrator
and enable passwords.
14 Configure login accounts, login precedence, multiple logins, and administrator and enable
passwords.
The following table describes commonly used parameter notation for these commands.
Table 53 Login Account and Password Command Parameters
NOTATION
name
password
privilege
This table summarizes the commands that manage passwords and the Privilege Levels for login
accounts.
Table 54 Login Account and Password Commands Summary
COMMAND
show logins
logins username <name>
password <password>
logins username <name>
privilege <privilege>
no logins username <name>
admin-password <password>
<confirm-string>
72
DESCRIPTION
1- 31 alphanumeric characters
Up to 31 printable characters.
The user privilege level. 1-14
DESCRIPTION
Displays login account information.
Creates an account with the specified user name and sets the
password.
name: 1- 31 alphanumeric characters
pwd: up to 31 printable characters
Assigns a privilege level to the specified account. The privilege level is
applied the next time the user logs in.
Removes the specified account.
Changes the administrator password. The password and confirmation
string must be exactly the same.
password: Up to 31 printable characters.
confirm-string: Type the password again for confirmation purpose.
M P
E 13
C 14
C 14
C 14
C 14
IES4005M User's Guide