Table of Contents
Advertisement
Chapter 11 Management
Table 60 Date and Time Commands Summary (continued)
COMMAND
time daylight-saving-time startdate
<week> <day> <month> <o-clock>
time daylight-saving-time end-date
<week> <day> <month> <o-clock>
show time server
time server
no time server
time server type <daytime|time|ntp>
time server address <ip-
address>|<ipv6-address>
time server sync
11.3 Hardware Monitor Commands
Use these commands to view hardware monitor statistics and set hardware monitoring alarm limits.
You can set maximum and minimum allowed speeds for individual fans, maximum and minimum
allowed temperatures and voltages for individual sensors in the management card and line cards.
This table describes the commands.
Table 61 Hardware Monitor Commands Summary
COMMAND
show hw-monitor
show hw-monitor statistics [slot
<slot>]
88
DESCRIPTION
Sets the day and time when Daylight Saving Time starts.
In most parts of the United States, Daylight Saving Time
starts on the second Sunday of March at 2 A.M. local time.
In the European Union, Daylight Saving Time starts on the
last Sunday of March at 1 A.M. GMT or UTC, so the o'clock
field depends on your time zone.
Sets the day and time when Daylight Saving Time ends. In
most parts of the United States, Daylight Saving Time
ends on the first Sunday of November at 2 A.M. local time.
In the European Union, Daylight Saving Time ends on the
last Sunday of October at 1 A.M. GMT or UTC, so the
o'clock field depends on your time zone.
Displays the time server settings.
Has the system synchronize its time with the time server
every 24 hours.
Disables synchronizing the system time with the time
server.
Sets the time server type.
: Daytime Protocol (RFC 867)
daytime
: Time Protocol (RFC 868)
time
: SNTP (RFC 2030)
ntp
Sets the IP address of the time server in IPv4 or IPv6
format.
ip-address: 0.0.0.0 ~ 223.255.255.255
ipv6-address: 2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
Synchronize the current system time with time server.
DESCRIPTION
Displays the system monitor settings.
Displays the system monitor statistics summary.
:
,
is the control card.
slot
1-5
1
are the line cards.
2-5
IES4005M User's Guide
M
P
C
13
C
13
E
1
C
13
C
13
C
13
C
13
C
13
M
P
E
1
E
1
Advertisement
Table of Contents
Troubleshooting
