Provisioning Slots - ZyXEL Communications IES4005M User Manual

Chapter 10 Initial Setup

10.7 Provisioning Slots

Note: You must provision line card slots before you can use them.
You must configure a line card slot for the appropriate type of line card before you can use a card in
the slot (see
be active. You can check the status of all slots using the show lcman command. After you configure
the slot for a type of line card, you can only use that type of line card in the slot. Any other type of
line card will not be active.
82
Section 12.1.1 on page 107). Otherwise, any line cards you install in the slot will not
IES4005M User's Guide