Advertisement
CAPONORD 1200
Removing the
head cover
•
Remove the bowl tappets and the ad-
justment shims using a magnet.
NOTE
GREASE THE BOWL TAPPETS AND THE ADJUSTMENT
SHIMS PROPERLY EACH TIME THEY ARE REMOVED.
•
Replace calibrated pads with a pad
thick enough to correct the valve clear-
ance previously detected.
•
List of calibrated break pads:
1. Calibrated pad 2.60
2. Calibrated pad 2.65
3. Calibrated pad 2.70
4. Calibrated pad 2.75
5. Calibrated pad 2.80
6. Calibrated pad 2.85
7. Calibrated pad 2.90
8. Calibrated pad 2.95
9. Calibrated pad 3.00
10.Calibrated pad 3.05
11.Calibrated pad 3.10
12.Calibrated pad 3.15
13.Calibrated pad 3.20
14.Calibrated pad 3.25
15.Calibrated pad 3.30
16.Calibrated pad 3.35
17.Calibrated pad 3.40
18.Calibrated pad 2.55
19.Calibrated pad 2.50
20.Calibrated pad 2.45
21.Calibrated pad 2.40
CAUTION
BEFORE REFITTING HEAD COVERS, CLEAN HEAD AND COVER SURFACES CAREFULLY.
Maintenance
MAIN - 71
Advertisement
