Suspensions
•
Install first the dust scraper (1), then
the oil seal (2), the ring (3) and the
movable bushing.
•
When inserting the above listed ele-
ments, pay attention not to damage
them passing over the hole on the
stem.
•
Remove the adhesive tape.
•
Install the fixed bushing on the stem.
•
Fit the sleeve on the stem and set the
oil seal into position with the aid of the
specific tool.
Specific tooling
AP8140189 Oil seal fitting tool for Ø 43 mm
(1.69 in) orifices
AP8140146 Weight
SUSP - 320
CAPONORD 1200