Advertisement
Engine
•
Screw the anticlockwise bolt of the
special tool on the external body.
•
Keeping the external body blocked and
gripping the key, screw the anticlock-
wise bolt so as to remove the flywheel
from the crankshaft.
Specific tooling
020713Y Flywheel extractor
•
Unscrew and remove the anticlockwise bolt of the special tool from the external body.
•
Unscrew the screw from the crankshaft.
Specific tooling
020713Y Flywheel extractor
•
Remove the flywheel together with the
freewheel.
•
Remove the start-up transmission
gear.
•
Check dimensions of the supports of
transmission gear on crankcase and
cover: the limit is 12.005 mm (0.4726
in) for both supports
•
In case of malfunction, the start-up
transmission gear cannot be over-
hauled. Therefore, the complete trans-
mission gear should be replaced.
ENG - 224
CAPONORD 1200
Advertisement
