Advertisement
CAPONORD 1200
pos.
Description
5
Camshaft retainer plate fastener
screw
6
Decompression device fixing screw
7
Fastener screw
Installing the chain tensioner
Refit the removed timing system chain tensioner on the cylinder - head:
•
Fit the timing chain on the crankshaft and on the intermediate gear.
•
Remove the screw and collect the washer and the spring.
•
Fit the chain tensioner body on the cyl-
inder and insert a new paper gasket.
•
Tighten the two screws to the prescri-
bed torque.
•
Insert the spring and tighten the screw together with the washer.
Cam timing
Timing
•
Remove the flywheel.
•
Install the timing chains on the inter-
mediate gears.
•
Install special tool flange on flywheel
side crankcase and fasten it using the
two screws supplied.
Specific tooling
020720Y Timing tool
Type
Quantity
torx M5
8
torx M8
2
28.5 Nm (21.02 lbf ft)
M5
2
5.50 Nm (4.06 lbf ft)
Torque
8.5 Nm (6.26 lbf ft)
3M SCOTCH GRIP
3M SCOTCH GRIP
3M SCOTCH GRIP
Engine
Notes
2353
2353
2353
ENG - 261
Advertisement
