APRILIA CAPONORD 1200 Service Station Manual page 331

CAPONORD 1200
•
Collect the rear wheel spacer.
•
Working from the left side, unscrew
and remove the five nuts and remove
the sprocket and the bolts.
•
Unscrew and remove the five screws
and remove the anti-vibration buffer
holder.
•
Check the flexible couplings according
to the routine maintenance table.
See also
Adjusting
Checking the rear wheel
CHECK THAT ALL PARTS ARE IN GOOD CONDITION, ESPECIALLY THOSE LISTED AS FOL-
LOWS.
REAR WHEEL BEARINGS
Carry out the check with the bearings fitted on the wheel.
ROTATION CHECK
•
Manually rotate the inside ring of each bearing. Rotation must be constant, smooth and
noiseless.
If one or both bearings do not fall within the control parameters:
Suspensions
SUSP - 331