Advertisement
Characteristics
WHEN ORDERING A NEW CONNECTING ROD OF CATEGORY "A" OR OF CATEGORY "B" (SEE
TABLE), CAN BE RECEIVED:
- IN THE FIRST CASE (CAT. A) ANY CONNECTING ROD "E1 or E2 or E3 or E4" THAT CAN BE
COUPLED TO THE CRANKSHAFT, EVEN IF IT IS DIFFERENT FROM THE ONE INSTALLED
ORIGINALLY.
- IN THE SECOND CASE (CAT. B) ANY CONNECTING ROD "E5 or E6 or E7" THAT CAN BE
COUPLED TO THE CRANKSHAFT, EVEN IF IT IS DIFFERENT FROM THE ONE INSTALLED
ORIGINALLY
CAUTION
THE CONNECTING RODS OF THE SAME CRANKSHAFT MUST BE THE SAME COLOUR OR
MARKING (EX. E1, E2, E3, ETC.) AND MUST HAVE THE SAME TYPE OF COUPLING WITH THE
CRANKSHAFT.
WHEN REFITTING, ALSO ENSURE THAT THE SEMI-BUSHINGS ARE ALL OF THE SAME CLASS.
See also
Removing the flywheel cover
Recommended products chart
Product
ENI i-RIDE PG 15W-50
FUCHS TITAN SAF 1091
OJ RACING FORK OIL TYPE 01
FUCHS TITAN SAF 1091
AGIP MP GREASE
AGIP CHAIN LUBE SPRAY
AGIP BRAKE 4
AGIP PERMANENT SPECIAL
CHAR - 54
R
ECOMMENDED PRODUCTS TABLE
Description
Engine oil
Fork oil (Caponord 1200)
Fork oil (Caponord 1200 Travel Pack)
Actuator oil of the active rear single shock
absorber (Caponord 1200 Travel Pack)
Black smooth textured lithium-calcium
soap based grease containing EP (ex-
treme pressure) additives with optimal
water-repellent properties
Spray lubricating grease
Brake / Clutch fluid
Ethylene glycol-based antifreeze fluid
with organic inhibition additives. Red,
ready to use.
CAPONORD 1200
Specifications
Use branded oils with performance
equivalent to or exceeding API SJ, JASO
MA - ACEA A3 - JASO MA2 specifica-
tions.
-
-
-
ISO L-X-BCHB 2 - DIN 51 825 KP2K-20
-
SAE J 1703 -FMVSS 116 - DOT 3/4 - ISO
4925 - CUNA NC 956 DOT 4 synthetic
fluid
ASTM D 3306 - ASTM D 4656 - ASTM D
4985 - CUNA NC 956-16
Advertisement
