CAPONORD 1200
•
Insert the cupped ring (1).
CAUTION
BE CAREFUL WITH THE CUPPED RING FITTING SIDE;
THE RING CONE SHALL BE DIRECTED TOWARDS THE
ENGINE.
•
Fit the lathed driven disc (2).
•
Fit the nitrided steel disc (3).
•
Fit the clutch plates. Start with the fric-
tion material discs and alternate with
steel discs.
•
Position all friction material discs with
their teeth aligned in one of the long
slots of the clutch housing.
•
Place the control rod.
•
Place the thrust plate.
CAUTION
ENSURE TO ALIGN THE ARROW ON THRUST PLATE
WITH THE MACHINED REFERENCE ON HUB.
•
Fit the clutch springs.
•
Fit the screw washers.
•
Tighten the six screws operating in
stages and diagonally.
•
On reassembly, replace the gasket under clutch cover.
Engine
ENG - 239