CAPONORD 1200
•
Remove the pumping member pin.
THE FOLLOWING PROCEDURE APPLIES TO
aDD VERSION OF THE LH STEM.
•
Using the appropriate tool fasten the
stem in the vice.
•
Undo completely the sleeve cap using
the special tool.
NOTE
THE STEMS ARE DIFFERENT.
Specific tooling
AP8140149 Protection for fitting operations
•
Drain the oil into a container of suitable
capacity to collect fluids.
DO NOT DISPOSE OF OIL INTO THE ENVIRONMENT.
DISPOSE OF ENGINE OIL IN A SEALED CONTAINER AND
TAKE IT TO YOUR SUPPLIER OR TO THE NEAREST USED
OIL COLLECTION CENTRE.
IT IS ADVISABLE TO WEAR LATEX GLOVES WHEN SERV-
ICING THE VEHICLE.
Suspensions
SUSP - 309